MW Microbes World Microbial Science & Research

 Introduction

Plastic materials are widely used in food packaging, clothing, medical equipment, construction and many other products because they are lightweight, durable and relatively inexpensive. However, their resistance to degradation also creates a serious environmental problem. Many synthetic polymers persist for long periods, accumulating in soils, rivers and oceans. Since microorganisms naturally decompose a wide range of organic materials, researchers have been investigating whether bacteria and fungi can also break down synthetic plastics and use their chemical components as nutrients.

Studies have demonstrated that certain microorganisms and their enzymes can degrade particular types of plastic under suitable conditions. One of the best-studied examples is polyethylene terephthalate (PET), a polyester commonly used in beverage bottles, food packaging and synthetic textile fibres. Some bacteria produce enzymes that break PET into smaller molecules, which can subsequently enter microbial metabolic pathways. However, the ability to degrade PET does not mean that microorganisms can efficiently eliminate every type of plastic. The chemical structure of the polymer, its physical properties and the environmental conditions strongly influence the degradation process. Understanding these differences is essential for evaluating the potential of microorganisms in plastic recycling and environmental biotechnology.

Figure 1. Microbial plastic degradation research investigates whether microorganisms and their enzymes can break down synthetic polymers such as PET. Conceptual illustration; not experimental evidence, was created by AI for Microbes World.

What Does It Mean When Bacteria Degrade Plastic?

The expression "plastic-eating bacteria" is frequently used to describe microorganisms capable of degrading synthetic polymers. Although the term is easy to understand, it can create a misleading impression of how the process actually works. Bacteria do not consume intact plastic objects in the same way animals consume food. Instead, certain microorganisms produce enzymes that break susceptible chemical bonds in polymer chains, releasing smaller compounds that may become available for microbial metabolism.

Plastics consist of long chains of repeating molecular units called polymers. During enzymatic degradation, these chains may be broken into shorter fragments known as oligomers and eventually into smaller compounds, including monomers. If microorganisms possess suitable transport and metabolic pathways, they may assimilate some of these compounds into cellular material or convert them into metabolic products. However, polymer breakdown and complete biodegradation are not identical processes. A bacterium may colonize a plastic surface without using the polymer as a carbon source, while changes in surface appearance or material weight do not necessarily demonstrate that the plastic has been biologically mineralized. To establish genuine biodegradation, researchers need evidence of chemical transformation and, where relevant, the fate of polymer-derived carbon.

Why Are Some Plastics More Difficult to Degrade Than Others?

Different plastics have different chemical structures, and these differences strongly influence their susceptibility to microbial enzymes. PET contains ester bonds that can be hydrolysed by certain enzymes, including PET hydrolases and some cutinases. Hydrolysis involves breaking chemical bonds through reactions involving water. By contrast, common plastics such as polyethylene (PE) and polypropylene (PP) contain carbon–carbon backbones that are generally more resistant to direct enzymatic cleavage. Their degradation may involve oxidation and other chemical changes before microorganisms can metabolize the resulting compounds. Consequently, the successful degradation of PET cannot be used as evidence that the same microorganism can efficiently degrade polyethylene or polypropylene.

The physical properties of a polymer are also important. PET contains both amorphous regions, where polymer chains are less regularly arranged, and crystalline regions, where the chains are more tightly organized. Enzymes generally have greater access to susceptible bonds in less crystalline material. Temperature, surface area, thickness and material processing can further influence degradation efficiency. For example, an enzyme that acts on a thin PET film or specially prepared powder may perform very differently on an intact plastic bottle. This is why microbiological studies should clearly identify the polymer, substrate preparation and experimental conditions rather than referring broadly to plastic degradation.

Discovery of a PET-Degrading Bacterium

An important development in microbial plastic degradation research occurred in 2016 when Yoshida and colleagues reported a bacterium capable of degrading and assimilating PET. The researchers isolated the organism from a microbial community associated with a PET recycling environment in Japan. Originally named Ideonella sakaiensis, strain 201-F6 was shown to use PET as a major carbon and energy source under the investigated conditions. The researchers also identified two enzymes involved in converting PET into smaller chemical compounds, providing a biological explanation for the organism's ability to process the polymer.

The scientific name of this bacterium has changed since its original discovery. It was subsequently classified as Piscinibacter sakaiensis, and a taxonomic study published by Lu and Chen in June 2026 proposed its reclassification as Pseudideonella sakaiensis. This is the current name recognized by NCBI Taxonomy. These names refer to the same bacterial species rather than different plastic-degrading organisms. The original discovery remains important because it demonstrated a defined biological pathway for PET degradation and assimilation. Nevertheless, it did not establish that the bacterium could rapidly eliminate plastic pollution under ordinary environmental conditions.

How Do PETase and MHETase Break Down PET?

The PET-degradation system associated with Pseudideonella sakaiensis involves two important enzymes, commonly known as PETase and MHETase. PETase acts on ester bonds within the PET polymer, releasing smaller degradation products, including mono(2-hydroxyethyl) terephthalate (MHET). MHETase then hydrolyses MHET to produce terephthalic acid and ethylene glycol, two compounds associated with PET synthesis. These reactions illustrate how specialized enzymes can convert a relatively resistant synthetic polymer into smaller molecules that may become accessible to microbial metabolism.

PETase and MHETase perform different but complementary functions. PETase initiates polymer depolymerization, whereas MHETase processes a soluble intermediate. However, the formation of terephthalic acid and ethylene glycol does not by itself establish complete microbial mineralization. The resulting compounds must undergo further metabolic transformations if their carbon is to be incorporated into biomass or converted into products such as carbon dioxide. Researchers have also identified PET-active enzymes in other microorganisms, demonstrating that PET hydrolysis is not restricted to a single bacterial species.

The possibility of improving these reactions through enzyme engineering has attracted considerable interest. In 2020, Tournier and colleagues reported an engineered PET depolymerase capable of efficiently breaking down PET under controlled processing conditions. Their work demonstrated how modifying an enzyme can improve its performance for potential recycling applications. However, laboratory or industrial enzyme systems operate under controlled conditions that differ substantially from natural environments. The success of an engineered enzyme in a reactor therefore should not be interpreted as evidence that the same process would occur efficiently in rivers, soils or oceans.

What Role Do Microbial Biofilms Play in Plastic Degradation?

Many microorganisms attach to solid surfaces and form communities known as biofilms. These communities contain microbial cells associated with extracellular material and may develop differences in nutrient availability, oxygen concentration and metabolic activity. Plastic surfaces can provide attachment sites for microorganisms, and the microbial communities associated with plastic debris are sometimes described collectively as the plastisphere. However, the presence of microorganisms on plastic does not necessarily indicate that they are degrading the polymer. Some organisms may simply use the surface as a habitat while obtaining nutrients from the surrounding environment.

For bacteria capable of degrading PET, surface attachment may influence how enzymes interact with the polymer and how cells encounter the resulting degradation products. A study published by Lim and colleagues in September 2026 investigated these relationships using the PET-degrading bacterium described in the paper as Piscinibacter sakaiensis, now classified as Pseudideonella sakaiensis. The researchers combined RNA sequencing with single-cell Raman spectroscopy to compare cells growing in biofilms on PET, planktonic cells exposed to PET and planktonic cells grown on maltose. This experimental design allowed them to distinguish metabolic responses associated with PET exposure from those specifically associated with biofilm growth.

The study identified changes in amino acid metabolism among PET-exposed cells, including increased expression of genes associated with branched-chain amino acid transport and serine biosynthesis. Biofilm-associated cells also showed increased expression of genes encoding tripartite tricarboxylate transporters. These findings suggest that biofilm formation may involve physiological changes beyond simply retaining extracellular enzymes near the polymer surface. However, the precise substrates transported by these systems and their direct contribution to PET degradation were not established. The proposed involvement of these transporters in capturing PET-derived compounds therefore remains a hypothesis requiring further experimental investigation.

Can Different Bacterial Species Cooperate to Degrade Plastic?

Microorganisms usually exist as members of complex communities rather than isolated populations. Different species may contribute complementary metabolic activities, allowing a community to process compounds that individual members cannot efficiently utilize alone. Such cooperation is particularly interesting in plastic biodegradation because polymer breakdown can generate several intermediates that require different enzymes and metabolic pathways.

In August 2026, Edwards and colleagues published a study investigating PET degradation by a bacterial consortium originally isolated from hydrocarbon-rich coastal soils in Galveston Bay, Texas. The consortium contained five bacterial strains, including three Pseudomonas strains and two Bacillus strains. Using comparative genomics, proteomics and chemical analyses, the researchers examined how different community members contributed to PET-associated metabolism. Their findings indicated that the Bacillus strains supported biofilm formation, stress tolerance and secondary hydrolytic activities, while the Pseudomonas strains contributed to aromatic-compound metabolism and responses to oxidative stress.

The study also investigated the transformation of MHET and identified evidence for a secondary process involving methylation and redox-associated reactions. These findings suggest that the consortium uses existing metabolic capabilities associated with hydrocarbon processing rather than relying entirely on a newly evolved, dedicated PET-degradation pathway. Importantly, the results concern a particular microbial community under defined experimental conditions. They do not demonstrate that all plastic-degrading bacteria require cooperation or that similar communities would efficiently remove PET waste from natural environments. Nevertheless, the study provides valuable evidence that interactions among microorganisms can influence how synthetic polymer-derived compounds are processed.

What Have Researchers Discovered in Marine Bacteria?

Marine microorganisms are increasingly being investigated for enzymes capable of acting on synthetic polymers. In April 2026, Trinh and colleagues reported PET-hydrolysing activity associated with two marine flavobacterial isolates, Maribacter dokdonensis and Arenibacter palladensis. The researchers observed biofilm formation on PET films and measured the release of micromolar amounts of terephthalic acid after several days of incubation. They also identified two enzymes, designated PET93 and PET94, belonging to the dienelactone hydrolase family. Although these enzymes differ structurally from several previously characterized PETases, biochemical experiments confirmed their ability to act on PET and selected PET-related compounds.

These findings expand the range of microbial enzymes known to possess PET-hydrolysing activity and suggest that additional enzyme families may contribute to polyester degradation. However, the release of measurable terephthalic acid under laboratory conditions does not demonstrate rapid or complete biodegradation in seawater. The environmental importance of these enzymes, their activity under natural marine conditions and the fate of the resulting degradation products remain subjects for further investigation. The study is therefore best understood as evidence of additional biochemical capabilities among marine bacteria rather than proof of an effective method for removing ocean plastic pollution.

How Do Scientists Confirm That Plastic Has Really Been Biodegraded?

Demonstrating plastic biodegradation requires more than observing microorganisms growing on a plastic surface. Researchers commonly examine changes in material weight, surface structure, polymer chemistry and the formation of soluble degradation products. These measurements can provide useful evidence, but each has limitations. A reduction in plastic weight may result from the loss of small fragments rather than biological conversion of the polymer. Similarly, cracks or holes observed by scanning electron microscopy can indicate material deterioration without proving that microorganisms have assimilated polymer-derived carbon.

Chemical analyses can provide stronger evidence by identifying characteristic products released during polymer breakdown. For PET, the detection of compounds such as MHET, terephthalic acid or ethylene glycol can help demonstrate hydrolytic reactions. However, depolymerization is not equivalent to complete biodegradation. To determine whether microorganisms actually incorporate polymer-derived carbon into biomass or convert it into carbon dioxide, researchers need methods that track the fate of that carbon.

One approach involves stable-isotope labelling, particularly the use of carbon-13-labelled polymers. Researchers can investigate whether labelled carbon appears in microbial biomass, dissolved metabolites or carbon dioxide. A review by He and colleagues published in 2026 examined the capabilities and limitations of stable-isotope methods for evaluating plastic biodegradation. The authors emphasized that isotope-based evidence must be interpreted alongside appropriate experimental controls and complementary chemical measurements. These approaches help distinguish physical fragmentation, chemical depolymerization, microbial assimilation and mineralization, which represent different processes and should not be treated as interchangeable.

Can Microorganisms Solve the Problem of Plastic Pollution?

The discovery of plastic-degrading microorganisms has created interest in biological approaches to waste management, but translating laboratory findings into practical environmental applications remains challenging. Natural environments differ considerably from controlled experimental systems. Temperature, nutrient availability, oxygen concentration and microbial interactions vary over time, while discarded plastic materials may contain mixtures of polymers, additives, dyes and other contaminants. These factors can influence both microbial survival and enzymatic activity.

Another challenge is the physical nature of plastic waste. Many experimental studies use thin films, powders or specially prepared substrates that provide relatively accessible surfaces for enzyme activity. Intact consumer products may be more difficult to degrade because of their thickness, crystallinity and limited accessible surface area. Even when a microorganism can degrade a particular polymer, the rate may be too slow for practical environmental remediation. Incomplete degradation may also produce smaller fragments or soluble compounds whose environmental fate must be considered.

For these reasons, releasing plastic-degrading microorganisms into natural environments should not be regarded as a straightforward solution to plastic pollution. Biological degradation may offer useful opportunities in specialized applications, but its effectiveness and environmental consequences require careful evaluation. Waste reduction, collection, reuse and appropriate recycling remain important components of plastic-waste management.

Could Microbial Enzymes Improve Plastic Recycling?

One promising application of plastic-degrading enzymes involves controlled recycling processes. Instead of relying on microorganisms to survive and function in uncontrolled environments, purified or engineered enzymes can be used as biological catalysts under optimized conditions. For suitable PET waste, enzymatic depolymerization may release smaller compounds that can be recovered and used in subsequent manufacturing processes.

Enzyme engineering can improve catalytic activity, stability and performance under particular processing conditions. However, the practical success of enzymatic recycling depends on more than enzyme activity alone. Substrate preparation, energy requirements, enzyme production costs, reaction efficiency and product recovery all influence the overall feasibility of a process. Environmental benefits also need to be assessed across the complete recycling system rather than assumed simply because the catalyst is biological.

Microbial enzymes therefore represent an important area of biotechnology research, particularly for selected polyester materials. Their greatest near-term value may lie in controlled industrial applications where reaction conditions can be managed and degradation products recovered, rather than in attempts to biodegrade mixed plastic waste directly in natural environments.

Conclusion

Microorganisms and their enzymes can degrade certain synthetic polymers, but the process depends strongly on the chemical structure of the plastic and the biological capabilities of the organism. PET is among the best-studied examples because specialized enzymes can hydrolyse its ester bonds and release compounds that may subsequently enter microbial metabolism. The discovery of Pseudideonella sakaiensis, the characterization of PETase and MHETase, and later enzyme-engineering studies have provided an important foundation for understanding this process.

Recent investigations have expanded this knowledge by examining biofilm-associated metabolism, cooperation among bacterial species and additional PET-active enzymes from marine microorganisms. These findings demonstrate that plastic degradation can involve several biological mechanisms, but they also highlight the need to distinguish polymer deterioration from genuine biodegradation. The ability to release degradation products under laboratory conditions does not automatically establish complete mineralization or practical environmental cleanup.

Microbial plastic degradation remains a promising research area, especially for developing specialized recycling technologies. Its future applications will depend on improved enzyme performance, a better understanding of microbial metabolism and reliable methods for determining the fate of plastic-derived carbon.

References

  1. Edwards, S., Rice, D., Palomino, P., Newton, I., & Mellies, J. L. (2026). Ancestral hydrocarbon metabolism enables PET degradation by a natural bacterial consortium. mSystems, 11(9), e00829-26. https://doi.org/10.1128/msystems.00829-26
  2. He, L., Liu, D.-F., Zhang, G., Huang, C., Hou, D., Zhang, Y., Peng, B.-Y., Yang, S.-S., Xing, D., Criddle, C. S., Yu, H.-Q., & Wu, W.-M. (2026). Carbon clues to plastic biodegradation: Capabilities, limitations, and interpretation of stable isotope evidence. Environmental Science & Technology, 60(30), 20705–20726. https://doi.org/10.1021/acs.est.6c06651
  3. Koh, J., & Cao, B. (2026). Complete genome sequence of the polyethylene terephthalate-degrading bacterium Pseudideonella sakaiensis strain 201-F6, formerly known as Ideonella sakaiensis. Microbiology Resource Announcements, 15(10), e00682-26. https://doi.org/10.1128/mra.00682-26
  4. Lim, H. W., Xu, J., Koh, J., Cao, B., & Tu, W. (2026). Amino acid reprogramming and biofilm-specific tricarboxylate transporters in PET-degrading Piscinibacter sakaiensis. Applied and Environmental Microbiology. Advance online publication. https://doi.org/10.1128/aem.01465-26
  5. Lu, H., & Chen, L. (2026). Emended description of the genus Rhizobacter and reclassification of Ideonella sakaiensis as Pseudideonella sakaiensis gen. nov., comb. nov. International Journal of Systematic and Evolutionary Microbiology, 76, 007181. https://doi.org/10.1099/ijsem.0.007181
  6. Tournier, V., Topham, C. M., Gilles, A., David, B., Folgoas, C., Moya-Leclair, E., Kamionka, E., Texier, H., Gavalda, S., Cot, M., Guémard, E., Dalibey, M., Nomme, J., Cioci, G., Barbe, S., Chateau, M., André, I., Duquesne, S., & Marty, A. (2020). An engineered PET depolymerase to break down and recycle plastic bottles. Nature, 580, 216–219. https://doi.org/10.1038/s41586-020-2149-4
  7. Trinh, L. T. T., Ochmann, C., Alio, I., Perez-Garcia, P., Keuter, S., Dierkes, R., Preuss, L., Vollstedt, C., & Streit, W. R. (2026). Role of dienelactone hydrolases in PET biodegradation by flavobacteria Maribacter dokdonensis and Arenibacter palladensis. Applied and Environmental Microbiology, 92(5), e01698-25. https://doi.org/10.1128/aem.01698-25
  8. Yoshida, S., Hiraga, K., Takehana, T., Taniguchi, I., Yamaji, H., Maeda, Y., Toyohara, K., Miyamoto, K., Kimura, Y., & Oda, K. (2016). A bacterium that degrades and assimilates poly(ethylene terephthalate). Science, 351(6278), 1196–1199. https://doi.org/10.1126/science.aad6359

No comments:

Post a Comment

Contact Microbes World

Name

Email *

Message *